REDZ Smart Communication Technologies

THIS SITE USES COOKIES.

Various types of cookies are used on our website (and on all other digital platforms including mobile applications). View our new THE INFORMATIVE TEXT ON LPPD AND PRIVACY here. Google Analytics allow Analytical cookies help us to improve our website by collecting and reporting information on its usage. Google AdWords ve Remarketing allow We use marketing cookies to help us improve the relevancy of advertising campaigns you receive.

I have read the above articles

_________

- 8 Channel 0-10V and 0-20mA Selectable Analog Input
- Device Address changeable with Modbus RTU commands
- Easy to Monitor Device Parameters such as Device Up Time, Modbus RTU read counter etc. with Modbus Commands
- Supports Modbus RTU Protocol over RS485 with 115200 8N1 Data Type
- Easy to Use Test and Parameter Change Software
- Easy Firmware Upgrade over Serial Line
- 5-60V DC wide range power input
- Wide operating temperature range from -40 to 85 °C
- Rugged Metal IP-40 housing design
- DIN-Rail mounting

MODBUS CHARACTERISTICS

Protocol
Modbus RTU
115200 8N1

Modbus RTU Address
Default value is 0x01
Changeable via Modbus Command

Monitoring Parameters
Modbus RTU Read counter
Time counter (in seconds)
FW version
available via Modbus Commands

INPUT CONNECTORS AND INDICATORS

Input Connectors
Terminal Connector for Analog Inputs

8 Channel Input terminals and polarity is important. All inputs references to Common point. 2 Common points and 8 Analog Inputs total 10 connection pins.

Input Channel Ratings
0-10V and 0-20mA Individually Selectable Analog Inputs

Analog Input Features
16-bit resolution with no missing codes
Throughput: 250 kSPS

Operation Mode Selection Switches

8 pin Switch to select operation mode of each Analog Input either 0-10V or 0-20mA
Switch Position ON: 4-20mA
Switch Position OFF: 0-10V

INTERFACE AND INDICATORS

RS485 Connector
Terminal Connector for 2 wire RS485 connection and GND.

Activity LEDs
Tx LED: Flashes when the device sends Modbus RTU packages
Rx LED: Flashes when the device receives Modbus RTU packages

System LED
Flashes during normal operation

FIRMWARE UPGRADE

Upgrade over Serial Line
Available from RS485 Serial Line

POWER

Input Range
5-48V (max. 60V) DC input

Reverse Polarity Protection
Available

Thermal Shutdown and Current Limit Protection
Available

PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS

Enclosure
Metal, IP 40

Dimensions
43 x 95 x 124 (w x d x h) mm

Weight
~380gr

Storage Temperature
-65 to 150 °C

Operating Temperature
-40 to 85 °C

Operating Humidity
5% to 95%Non-condensing

HUR518: 8 Channel 0-10V and 0-20mA Selectable Analog Input Modbus RTU Remote IO Device, 1 x RS485, 5-48V (max. 60V) DC Power Input

ZTerminal Software

↗ User Manual ☶ Datasheet