- Supports 8 x 10/100Base-T(X) ports
- Supports 2 x 10/100/1000 SFP Ports
- Plug-and-play without additional settings
- 100 - 240V AC (120 – 370V DC), 50Hz to 60Hz AC wide range power input
- Supports Full/Half-Duplex, auto-negotiation, auto MDI/MDIX and auto polarity correction on each port
- Wide operating temperature range from -25 to 70 °C
- Rugged Metal IP-40 housing design
- DIN-Rail mounting
TECHNOLOGY
Mac Table
16K MAC address entry
CRC/Direct hashing algorithm
Jumbo Frame @ 1Gbps
16K Bytes (default disabled)
Max. length 1664B without supporting jumbo packet
Processing
Store & Forward, Share Memory Non-Blocking Architecture
Memory
Built-in 4Mb SRAM for packet buffer
Flow Control
802.3x compliant flow control in full duplex
Collision/ Carrier_ sense based backpressure in half duplex
IGMP/MLD Snooping
IGMP Version 1, 2, 3 / MLD Version 1, 2 (default disabled)
MLD snooping. ( 4 sets IP address per MLD list )
Hardware Auto loop detection
Available
IPv6 function
TCP/UDP port number and FLAG
Finding out next header is based on ICMPv6, authentication, encapsulation, fragment or user-defined header
Auto Power Saving Mode
Automatically enters this mode if no cable link is established.
INTERFACE AND INDICATORS
Power indicatorPower LED
Reset ButtonHard reset of the device
10/100TX RJ45Activity LEDs
SFP PortsActivity LEDs and Speed LEDs
POWER
Input Range100 - 240V AC (120 – 370V DC), 50Hz to 60Hz AC wide range power input
IsolationFully Isolated >4200Vrms, 5mA 1 Min
Insulation: Class II
PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
Enclosure
Metal, IP 40
Dimensions
43 x 95 x 124 (w x d x h) mm
Weight
~380gr
Storage Temperature
-40 to 105 °C
Operating Temperature
-25 to 70 °C
Operating Humidity
5% to 95%Non-condensing
APPLIED STANDARDS
EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD),
EN61000-4-3 (RS),
EN61000-4-4 (EFT),
EN61000-4-5 (Surge),
EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950
Warranty
3 years
BSB220: Industrial Unmanaged Ethernet Switch, 8 x 10/100 T(x) ETH ports and 2 x SFP Uplink Ports, 90 - 265V AC (100 – 370V DC), 47Hz to 63Hz AC Power Input