We use cookies to optimize site functionality and provide the best possible experience.
View our new Privacy and Protection of Personal Data here.
Accept Settings
BSB215 Industrial Unmanaged Ethernet Switch with 5 x 10/100Base-T(X) Ports

BSB215
Industrial Unmanaged Ethernet Switch with 5 x 10/100Base-T(X) Ports

per one
114.00 USD 120.00 USD
If you buy less than 5 items you will lose your 5% discount
-    5 x 10/100Base-T(X) copper ports
-    Plug and play: no configuration, the switch is ready when powered, with no software and no settings
-    Auto negotiation and auto MDI/MDIX on every copper port: straight or crossed cables both work
-    Store-and-forward switching with IEEE 802.3x flow control in full duplex and back pressure in half duplex
-    MAC address table of 1K entries
-    Link and activity LED for every copper port
-    100 - 240 V AC (120 - 370 V DC), 50 - 60 Hz power input, isolated power supply (4200 Vrms)
-    Operating temperature -25 to +70 deg C
-    Rugged metal housing, IP 40, 44 x 95 x 125 mm
-    DIN rail mounting
SWITCHING - BSB
Switching
Store-and-forward switching with IEEE 802.3x flow control in full duplex and back pressure in half duplex
Auto Negotiation and MDI/MDIX
auto negotiation and auto MDI/MDIX on every copper port: straight or crossed cables both work
MAC Address Table
1K entries
Standards
IEEE 802.3, 802.3u, 802.3x
Configuration
no software and no web page to configure; the switch is ready when powered


CONNECTORS AND PORTS - BSB
10/100T(X) RJ45 Ports
5 x RJ-45, 10/100 Mbit/s, ETH1 to ETH5, with auto MDI/MDIX
Cable
10BASE-T: Cat. 3, 4 or 5, 100-ohm UTP; 100BASE-TX: Cat. 5, 100-ohm UTP; maximum length 100 m (328 ft)
RJ-45 Pins
pins 1, 2, 3 and 6 carry the data of 10BASE-T and 100BASE-TX; pins 4, 5, 7 and 8 are not used for data
Power Terminal
2-pin terminal block, 3.81 mm pitch; pins 1 and 2: AC supply input (line conductor and neutral conductor)
Warning
mains voltage; installation by qualified personnel only; disconnect power before wiring


LED INDICATORS - BSB
Port LEDs
one link / activity LED for each port ETH1 to ETH5; each LED shows the link and activity of its port


POWER - BSB
Input Range
100 - 240 V AC (120 - 370 V DC), 50 - 60 Hz; isolated power supply
Isolation
4200 Vrms (power supply)
Protection
isolated supply with input varistor


PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS - BSB
Enclosure
Metal, IP 40
Dimensions
44 x 95 x 125 mm (w x d x h)
Weight
approx. 380 g
Operating Temperature
-25 to +70 deg C
Storage Temperature
-40 to +85 deg C
Operating Humidity
5 - 95 %, non-condensing
Mounting
DIN rail


CONFORMITY - BSB
CE
manufacturer declaration for BSB115, BSB118, BSB215 and BSB218 to EN 55032 and EN IEC 62368-1.


BSB215: Industrial unmanaged Ethernet switch, 5 ports, AC power input
LKM Series Electricity Meter Protocol to Modbus Protocol Gateways with MQTT (and LoRaWAN)
LKM Series Electricity Meter Protocol to Modbus Protocol Gateways with MQTT (and LoRaWAN)
STG Series WMBus (Wireless MBus) - Modbus Protocol Gateway with MQTT
STG Series WMBus (Wireless MBus) - Modbus Protocol Gateway with MQTT
TLM Series LoRa Modems and LoRaWAN EndNode Modems
TLM Series LoRa Modems and LoRaWAN EndNode Modems
CKL Series Modbus TCP and RTU Gateways and Serial to Ethernet Gateways
CKL Series Modbus TCP and RTU Gateways and Serial to Ethernet Gateways
BSB Series Industrial Unmanaged Ethernet Switch (with Broadband Power Line)
BSB Series Industrial Unmanaged Ethernet Switch (with Broadband Power Line)
HUR Series Modbus TCP and RTU Remote I/O Devices with MQTT (and LoRaWAN)
HUR Series Modbus TCP and RTU Remote I/O Devices with MQTT (and LoRaWAN)
BKV Series Industrial Converters and USB Tools
BKV Series Industrial Converters and USB Tools
MBC Series IEC62056-21 Protocol Auto Baud Changer
MBC Series IEC62056-21 Protocol Auto Baud Changer
KMK Series Optical Probes for Energy Meters
KMK Series Optical Probes for Energy Meters
REDZ Software Solutions
REDZ Software Solutions
LoRaWAN
LoRaWAN
In today's rapidly digitizing world, IoT (Internet of Things) devices and applications are becoming increasingly prevalent. In this context, long-range wireless communication technologies play a significant role. One such technology that stands out is LoRa, which offers an innovative solution for low-power, long-range wireless communication.
MQTT
MQTT
As the Internet of Things (IoT) continues to grow, the demand for efficient, lightweight, and reliable communication protocols becomes essential. One of the most popular protocols meeting these demands is MQTT (Message Queuing Telemetry Transport).
Broadband Power Line (BPL)
Broadband Power Line (BPL)
Broadband Powerline Technology (BPL), also known as Powerline Communication (PLC), represents a revolutionary approach to data transmission, leveraging the existing electrical power infrastructure to deliver broadband internet connectivity.
Wireless MBus (WMBus)
Wireless MBus (WMBus)
In an era defined by connectivity and data-driven decision-making, the need for efficient and reliable metering solutions has never been greater. Enter Wireless M-Bus (Meter-Bus) technology, a versatile and robust platform designed to revolutionize remote meter reading and data communication in utility management systems.
IEC62056-21 (for Electricity Meters)
IEC62056-21 (for Electricity Meters)
IEC 62056-21 is an international standard for communication with electricity meters. Developed by the International Electrotechnical Commission (IEC), this protocol standardizes the way data is exchanged between meters and various devices or systems, ensuring interoperability and efficient data management.
DLMS/COSEM (for Electricity Meters)
DLMS/COSEM (for Electricity Meters)
DLMS/COSEM (Device Language Message Specification / Companion Specification for Energy Metering) is the global standard for smart energy metering. It provides a highly secure, interoperable framework for reading and managing energy data across diverse utility networks.
P1 Companion Standard (for Electricity Meters)
P1 Companion Standard (for Electricity Meters)
Smart energy meters have become essential in monitoring and controlling energy usage. To facilitate better integration, communication, and functionality of these smart meters, standards are crucial. One such standard, particularly relevant in Europe, is the P1 Companion Standard.
Modbus RTU
Modbus RTU
Modbus RTU is a widely recognized and utilized communication protocol in the field of industrial automation. Developed by Modicon (now Schneider Electric) in 1979, it was designed to facilitate communication between various electronic devices, primarily programmable logic controllers (PLCs).
Modbus TCP
Modbus TCP
Modbus TCP, also known as Modbus TCP/IP, is a widely adopted communication protocol in the industrial automation sector. It was developed to enable Modbus communication over Ethernet networks, combining the reliability and simplicity of the Modbus protocol with the versatility of Ethernet.
LoRa RF Communication
LoRa RF Communication
LoRa stands for Long Range and is a proprietary wireless modulation technique developed by Semtech. Essentially, LoRa is the physical layer, or the hardware, that allows long-range communication between devices.
MBus
MBus
M-Bus (Meter-Bus) is a robust European standard specifically designed for the remote reading of utility meters, such as electricity, gas, water, and heat. It utilizes a simple, polarity-independent two-wire system that transmits both data and power over long distances, making it highly cost-effective and immune to industrial noise.