REDZ Smart Communication Technologies

- Especially plug and play designed for EMH LXQJ-XC meters
- Direct replacement for Variomod XC modules for EMH meters
- Auto reads EMH Electricity meters that communicates in IEC62056-21 standard and maps in predefined MODBUS register table
- Configurable Modbus address via Modbus Commands
- Configurable Reading Period on IEC6056-21 side via Modbus Commands
- Configurable Reading Table Number on IEC6056-21 side via Modbus Commands
- Gets power directly from meter
- Serial interface directly connected to meter ( with 15kV ESD protection)
- Wide operating temperature range from -40 to 85 °C
- Customization of reading process and register tables based on client request
- Firmware upgradable over serial line

CONNECTIONS AND PROTOCOLS - LKM614

	Modem Side Connection	Modem Side Connection	Meter Side Protocol
LKM614	RS485	Meter Own Interface (Directly connects to Meter)	IEC62056-21

MODBUS DETAILS - LKM RTU Models

Modbus RTU Address
Default value is 0x01
Changeable via Modbus Command
Reading Period on Meter Side
Default value is 10 (in seconds)
Changeable via Modbus Command
IEC62056-21 Protocol Meter Read Out Table
Default value is 0x30 = ‘0’in ASCII
Changeable via Modbus Command
IEC62056-21 Protocol Meter Reading Method
Reads each line of table and register data during reading
IEC62056-21 Protocol Meter Read Out Data
Date
Time
Import and Export Active Energy
Import and Export Reactive Energy
Reactive Energy in 4 Quadrants
Import and Export Maximum Demands
Active Power
Phase Currents for each phase
Phase Voltages for each phase
Frequency
Error Code
Extendable/Changeable via firmware change
Monitoring Parameters
IEC Read counter
Time counter (in seconds)
FW version
Query via Modbus Commands

RS485 TERMINAL

RS485 Connector
Terminal Connector for 2 wire RS485 connection A - B and GND can be used as well.

INTERFACE AND INDICATORS

Operation Mode Selection Switch
Selects the operating mode of the device

Mode Selection	Modem Side Communication Parameters	Meter Side Communication Parameters
Mode 1 (LED 1 ON)	19200 8N1	Starts with 300 baud rate and changes during transmission to target baud rate based on IEC62056-21 protocol
Mode 2 (LED 2 ON)	9600 8N1	Starts with 300 baud rate and changes during transmission to target baud rate based on IEC62056-21 protocol
Mode 3 (LED 3 ON)	19200 8N1	19200 7E1 Fixed
Mode 4 (LED 4 ON)	9600 8N1	9600 7E1 Fixed

LED Indicators
Following LEDs available to show system status.
1 – Mode 1 LED
2 – Mode 2 LED
3 – Mode 3 LED
4 – Mode 4 LED
5 – System LED: Blinks every second
6 – Tx LED: Sending data from Modem Side to Meter Side
7 – Rx LED: Receiving data from Meter Side to Modem Side

Firmware Upgarde

Upgrade over Serial Line
Available from Modem side Serial Line
Ex:RS232 on LKM111 or RS485 on LKM144

Device must be on operating mode 19200 8N1 for firmware upgrade process.

POWER - LKM DIRECT CONNECTED Models

Gets power directly from Meter

PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS - LKM DIRECT CONNECTED MODELS

Enclosure
ABS, IP51
Dimensions
105 x 45 x 27 (h x w x d) mm
Weight
~60gr
Storage Temperature
-55 to 125 °C
Operating Temperature
-40 to 85 °C
Operating Humidity
5% to 95%Non-condensing

LKM614: Electricity Meter Protocol to Modbus RTU Protocol Gateway, Modem Side RS485 and Meter Side is Direct Connection to Meter, Powered from Meter Interface

ZTerminal Software

↗ User Manual ☶ Datasheet

KMK Series Optical Probes for Energy Meters

Learn More & Buy external link

REDZ Software Solutions

Learn More & Buy external link