5 Channel 4-20mA Analog Output and 1 x RS485
HUR555
5 Channel 4-20mA Analog Output and 1 x RS485
per one
123.50 EUR 130.00 EUR
If you buy less than 5 items you will lose your 5% discount
- 5 Channel 4-20mA Analog Output and 1 x RS485
- Device Address changeable with Modbus RTU commands
- Output Configuration can be defined by user for restart with Modbus Commands
- Output Values can be saved and Applied After Auto Restart 
- Easy to Monitor Device Parameters such as Device Up Time, Modbus RTU read counter etc. with Modbus Commands
- Supports Modbus RTU Protocol over RS485 with 19200 8N1 Data Type
- Easy to Use Test and Parameter Change Software with Free C# codes
- Easy Firmware Upgrade over Serial Line
- 5-60V DC wide range power input
- Wide operating temperature range from -40 to 85 °C 
- Rugged Metal IP-40 housing design
- DIN-Rail mounting
MODBUS CHARACTERISTICS
Protocol
Modbus RTU
19200 8N1


Modbus RTU Address
Default value is 0x01
Changeable via Modbus Command


Save Output Values Before Auto Restart
Default is enabled and when system auto resets (every 24 hour) the values are saved and applied after restart
Changeable via Modbus Command


Save Output Values and Apply on Power Up
Default is disabled, user can activate and enter parameters for each output individually
Changeable via Modbus Command


Monitoring Parameters
Modbus RTU Read counter
Time counter (in seconds)
FW version
available via Modbus Commands


OUTPUT CONNECTORS AND INDICATORS
Output Connectors
Terminal Connector for Digital Outputs


5 Channel Output terminals and polarity is important. 2 pins for each connection and total 10 connection pins.


Output Channel Ratings
4-20mA Analog Outputs designed for 24V 250ohm load or 12V 125ohm load


Over Voltage Protection
40V


INTERFACE AND INDICATORS
RS485 Connector
Terminal Connector for 2 wire RS485 connection and GND. 


Activity LEDs
Tx LED: Flashes when the device sends Modbus RTU packages
Rx LED: Flashes when the device receives Modbus RTU packages


System LED
Flashes during normal operation


FIRMWARE UPGRADE
Upgrade over Serial Line
Available from RS485 Serial Line


POWER
Input Range
5-60V DC input


Reverse Polarity Protection 
Available


Thermal Shutdown and Current Limit Protection
Available


PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
Enclosure
Metal, IP 40


Dimensions
43 x 95 x 124 (w x d x h) mm


Weight 
~380gr


Storage Temperature
-65 to 150 °C


Operating Temperature
-40 to 85 °C 


Operating Humidity
5% to 95%Non-condensing


HUR555: 5 Channel 4-20mA Analog Output Modbus RTU Remote IO Device, 1 x RS485, 5-60V DC Power Input

BSB Series Industrial Unmanaged Ethernet Switch
BSB Series Industrial Unmanaged Ethernet Switch
TLM Series LoRa and LoRaWAN Modems
TLM Series LoRa and LoRaWAN Modems
LKM Series MODBUS RTU to IEC62056-21 Meter Gateway
LKM Series MODBUS RTU to IEC62056-21 Meter Gateway
CKL Series Modbus, Serial to Ethernet Gateway
CKL Series Modbus, Serial to Ethernet Gateway
STG Series WMBus (Wireless MBus) - Modbus TCP/RTU Gateway
STG Series WMBus (Wireless MBus) - Modbus TCP/RTU Gateway
HUR Series Modbus RTU Remote I/O Devices
HUR Series Modbus RTU Remote I/O Devices
MBC Series IEC62056-21 Protocol Auto Baud Changer
MBC Series IEC62056-21 Protocol Auto Baud Changer
KMK Series Optical Probes for Energy Meters
REDZ Software Solutions
We use cookies to optimize site functionality and provide the best possible experience.
View our new Privacy and Protection of Personal Data here.
Accept Settings