8 Channel 5-275V AC-DC, 100mA Digital Optocoupler Output Modbus RTU Remote IO Device, 1 x RS485
HUR218
8 Channel 5-275V AC-DC, 100mA Digital Optocoupler Output Modbus RTU Remote IO Device, 1 x RS485
per one
133.00 EUR 140.00 EUR
If you buy less than 5 items you will lose your 5% discount
- 8 Channel 5-275V AC-DC, 100mA Digital Optocoupler Output
- Device Address changeable with Modbus RTU commands
- Output Configuration can be defined by user for restart with Modbus Commands
- Output Values can be saved and Applied After Auto Restart 
- Easy to Monitor Device Parameters such as Device Up Time, Modbus RTU read counter etc. with Modbus Commands
- Supports Modbus RTU Protocol over RS485 with 19200 8N1 Data Type
- Easy to Use Test and Parameter Change Software with Free C# codes
- Easy Firmware Upgrade over Serial Line
- 90 - 265V AC (100 – 370V DC), 47Hz to 63Hz AC wide range power input
- Wide operating temperature range from -25 to 70 °C 
- Rugged Metal IP-40 housing design
- DIN-Rail mounting
MODBUS CHARACTERISTICS
Protocol
Modbus RTU
19200 8N1


Modbus RTU Address
Default value is 0x01
Changeable via Modbus Command


Save Output Values Before Auto Restart
Default is enabled and when system auto resets (every 24 hour) the values are saved and applied after restart
Changeable via Modbus Command


Save Output Values and Apply on Power Up
Default is disabled, user can activate and enter parameters for each output individually
Changeable via Modbus Command


Monitoring Parameters
Modbus RTU Read counter
Time counter (in seconds)
FW version
available via Modbus Commands


OUTPUT CONNECTORS AND INDICATORS
Output Connectors
Terminal Connector for Digital Outputs


8 Channel Output terminals and polarity is not important. 2 pins for each connection and total 16 connection pins.


Output Channel Ratings
5-275V AC-DC, 100mA Digital Optocoupler Outputs


Isolation
3750 Vrms for 1 min


Over Voltage Protection
275V
Non-repetitive peak on-state pulse current: 80A


Output Status LEDs
Shows which pin is ON (conducting) and OFF (cut off) for Digital Outputs


INTERFACE AND INDICATORS
RS485 Connector
Terminal Connector for 2 wire RS485 connection and GND. 


Activity LEDs
Tx LED: Flashes when the device sends Modbus RTU packages
Rx LED: Flashes when the device receives Modbus RTU packages


System LED
Flashes during normal operation


FIRMWARE UPGRADE
Upgrade over Serial Line
Available from RS485 Serial Line


PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
Input Range
90 - 265V AC (100 – 370V DC), 47Hz to 63Hz AC input


Isolation
Fully Isolated >4200Vrms, 5mA 1 Min
Insulation: Class II


PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
Enclosure
Metal, IP 40


Dimensions
43 x 95 x 124 (w x d x h) mm


Weight 
~380gr


Storage Temperature
-40 to 105 °C 


Operating Temperature
-25 to 70 °C  


Operating Humidity
5% to 95%Non-condensing


HUR218: 8 Channel 5-275V AC-DC, 100mA Digital Optocoupler Output Modbus RTU Remote I/O Device, 1 x RS485, 90 - 265V AC (100 – 370V DC), 47Hz to 63Hz AC Power Input

BSB Series Industrial Unmanaged Ethernet Switch
BSB Series Industrial Unmanaged Ethernet Switch
TLM Series LoRa and LoRaWAN Modems
TLM Series LoRa and LoRaWAN Modems
LKM Series MODBUS RTU to IEC62056-21 Meter Gateway
LKM Series MODBUS RTU to IEC62056-21 Meter Gateway
CKL Series Modbus, Serial to Ethernet Gateway
CKL Series Modbus, Serial to Ethernet Gateway
STG Series WMBus (Wireless MBus) - Modbus TCP/RTU Gateway
STG Series WMBus (Wireless MBus) - Modbus TCP/RTU Gateway
HUR Series Modbus RTU Remote I/O Devices
HUR Series Modbus RTU Remote I/O Devices
MBC Series IEC62056-21 Protocol Auto Baud Changer
MBC Series IEC62056-21 Protocol Auto Baud Changer
KMK Series Optical Probes for Energy Meters
REDZ Software Solutions
We use cookies to optimize site functionality and provide the best possible experience.
View our new Privacy and Protection of Personal Data here.
Accept Settings