We use cookies to optimize site functionality and provide the best possible experience.
View our new Privacy and Protection of Personal Data here.
Accept Settings
Modbus, Serial to Ethernet Gateway with 2 x 10/100Base-T(x) Ports, 1 x RS232 and 1 x RS485 Serial Ports
CKL254
Modbus, Serial to Ethernet Gateway with 2 x 10/100Base-T(x) Ports, 1 x RS232 and 1 x RS485 Serial Ports
per one
199.50 USD 210 USD
If you buy less than 5 items you will lose your 5% discount
-    Supports 2 x 10/100Base-T(X) ports + 1 x BPL link
-    Supports Full/Half-Duplex, auto MDI/MDI-X on each port
-    DHCP Server Capability
-    Supports 1 x RS232 and 1 x RS485 Serial Connection up to 460800 Baud
-    Embedded web interface for ease of use
-    Up to 10 client connection in Server Mode
-    3 different Gateway Operating Modes:
     Transparent Communication
     Modbus TCP to RTU Conversion
     Modbus RTU to TCP Conversion
-    Transparent Operating Mode lets device act as Serial to Ethernet Gateway
-    Modbus TCP to RTU (used with Modbus TCP Master Device) Operating Mode lets device act as Modbus Gateway
-    Modbus RTU to TCP (used for Modbus RTU Master Device) Operating Mode lets device act as Modbus Gateway
-    Up to 10 remote TCP/IP device connection in Modbus RTU to TCP Gateway Operating Mode

-    Easy to follow Serial and Ethernet data packages on web interface
-    Black List and White List based IP Filter in TCP Server Mode
-    Firmware Upgrade over Web
-    2 firmware storage capability on same device (1 active only)
-    90 - 265V AC (100 – 370V DC), 47Hz to 63Hz AC wide range power input
-    Wide operating temperature range from -25 to 70 °C
-    Rugged Metal IP-40 housing design
-    DIN-Rail mounting
TECHNOLOGY
ETHERNET SWITCH TECHNOLOGY
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-T(X)
IEEE 802.3x Flow Control
Mac Table
1K MAC address entry
Processing
Store-and-Forward
Memory
448K bits packet buffer memory


CONNECTORS AND PORTS
Console Port
Micro USB or USB Type-C connection for LOG in 115200 baud
10/100T(X) RJ45 Ports
Ethernet Connection on 2 ports
Serial Ports
5 pin wired Terminal Connection
Tx, Rx, GND for RS232
A and B for RS485
Reset Buttons
Reset to Client and Reset to Server Operating modes buttons


LED INDICATORS
Power indicator
Power LED
10/100T(X) Indicators
Activity LEDs:
ETH1, ETH2 and CKL (Activity of device itself)
System Indicators
Status LED,
Tx and Rx of data LEDs and Server LED
(LED ON: Server Operating Mode, LED OFF: Client Operating Mode)
Console Indicators
Tx and Rx of data LEDs


POWER
Input Range
100 - 240V AC (120 – 370V DC), 50Hz to 60Hz AC input
Isolation
Fully Isolated >4200Vrms, 5mA 1 Min
Insulation
Class II


PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
Enclosure
Metal, IP 40
Dimensions
43 x 95 x 124 (w x d x h) mm
Weight
~400gr
Storage Temperature
-40 to 105 °C 
Operating Temperature
-25 to 70 °C  
Operating Humidity
5% to 95%Non-condensing


CKL254: Modbus, Serial to Ethernet Gateway, 2x 10/100 T(x) ETH ports, 1 x RS232 & 1 x RS485, 100 - 240V AC (120 – 370V DC), 50Hz to 60Hz AC Power Input
LKM Series Electricity Meter Protocol to Modbus Protocol Gateways
LKM Series Electricity Meter Protocol to Modbus Protocol Gateways
STG Series WMBus (Wireless MBus) - Modbus TCP/RTU Gateway
STG Series WMBus (Wireless MBus) - Modbus TCP/RTU Gateway
TLM Series LoRa and LoRaWAN Modems
TLM Series LoRa and LoRaWAN Modems
CKL Series Modbus, Serial to Ethernet Gateway
CKL Series Modbus, Serial to Ethernet Gateway
BSB Series Industrial Unmanaged Ethernet Switch
BSB Series Industrial Unmanaged Ethernet Switch
REDZ Software Solutions
HUR Series Modbus TCP and RTU Remote I/O Devices
MBC Series IEC62056-21 Protocol Auto Baud Changer
MBC Series IEC62056-21 Protocol Auto Baud Changer
KMK Series Optical Probes for Energy Meters
REDZ Software Solutions