- Supports 8 x 10/100Base-T(X) ports
- Supports PoE+ on all ports
90 Watt Power Supply combined for all ports
Maximum 36 Watt per port
- IEEE 802.3AF-2003 and 802.3AT-2009 compliant
- Plug-and-play without additional settings
- 100 - 240V AC (120 – 370V DC), 50Hz to 60Hz AC wide range power input
90Watt Power Supply
- Supports Full/Half-Duplex, auto-negotiation, auto MDI/MDIX and
auto polarity correction on each port
- Wide operating temperature range from -30 to 80 °C
- Rugged Metal IP-40 housing design
- DIN-Rail mounting
TECHNOLOGY
PoE+
IEEE 802.3AF-2003 and 802.3AT-2009 compliant
90 Watt Power Supply combined for all ports
Maximum 36 Watt per port
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-T(X)
IEEE 802.3x Flow Control
Mac Table
1K MAC address entry
Processing
Store-and-Forward
Memory
448K bits packet buffer memory
Auto Power Saving Mode
Automatically enters this mode if no cable link is established.
INTERFACE AND INDICATORS
Reset Button
Hard reset of the device
10/100TX RJ45
Activity LEDs
PoE+ Ports
Activity LEDs same with ETH Activity
POWER
Input Range
100 - 240V AC (120 – 370V DC), 50Hz to 60Hz AC wide range power input
90Watt Power Supply
Protection
115% ~ 160% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
Over Temperature
Protection type : Shut down o/p voltage, re-power on to recover
Isolation
Withstand Voltage: 4KVAC
Isolation Resistance: 100M Ohms / 500VDC / 25℃/ 70% RH
PHYSICAL AND ENVIRONMENTAL CHARACTERISTICS
Enclosure
Metal, IP 40
Dimensions
43 x 95 x 124 (w x d x h) mm
Weight
~400gr
Storage Temperature
-40 to 85 °C
Operating Temperature
-30 to 80 °C
Operating Humidity
20% to 90% Non-condensing
BSB268: Industrial Unmanaged PoE+ Ethernet Switch, 8 x 10/100 T(x) ETH ports and all Ports Support PoE+, 100 - 240V AC (120 – 370V DC), 50Hz to 60Hz AC Wide Range Power Input, 90 Watt Power Supply combined for all Ports
